For 40+ years we've helped over 300,000 dog trainers just like you!

Learn more about Leerburg

$6.99 Flat Rate Shipping

Learn more
Ask Cindy Our Newsletter Free Catalog
Breeding & Whelping Puppies Whelping Equipment Incubator with Digital Humidity System
Incubator with Digital Humidity System
Based on 0 reviews

Incubator with Digital Humidity System

Based on 0 reviews
  • Ptc heater uses forced air technology
  • Perfect for newborn puppies, kittens, and other small pets
  • Provides digital controlled temperature
  • Digital Humidity System also allows digital humidity control
  • Portable and lightweight allows you to transport the unit easily
  • Can also be used as a nebulizing and oxygen chamber
  • BPA free, acid-free, PVC free, lignin free, and recycle #5
Loading the video...
Loading the video...

The Incubator with Digital Humidity System includes the following:

  • 1 - Lifeline Pet Supplies Puppy Kitten Pet Incubator Icu Housing - BPA free, acid-free, PVC free, lignin free, and recycle #5 making them safe for puppies, kittens, and other small pets. Pre-fabricated housings allows to provide a cost-effective unit that is both portable and affordable. This lightweight design utilizes a two-part assembly. The tray has 2 locking mechanisms on each side and can easily be removed to clean and sterilize.
  • 1 - Digital Humidity System - The Digital Humidity System is extremely important as it allows precise digital control of the humidity level within the incubator. Puppies and kittens especially are subject to dehydrating easily if a proper humidity level is not maintained. This system includes the Digital Humidity Controller box with our new slide-n-lock technology, a humidity pump, flexible/expandable tubing, and the connections to attach it easily to your incubator. Please note, the recommended humidity level for puppies and kittens is 40%-60% with a target being set for 50% relative humidity. The digital humidity controller box includes instructions and recommended starting humidity settings on the top for quick reference, color-coded connections for the pump, allowing simple error-proof connections to the humidity pump and the constant power outlet on the box.
  • 1 - PTC Forced Air Heater Fan - This unit uses a PTC forced air heater fan that distributes heat evenly throughout the incubator. The PTC forced air heater fan design pulls filtered outside room air into the unit and then heats that air circulating the fresh heated air throughout the unit. Because the unit is constantly circulating fresh air there is virtually no chance of carbon dioxide build-up inside the unit. The forced air technology used in this unit is similar to that of units priced 2-3 times higher.
  • 1 - Heater Fan Protection Cover - This protection cover completely covers the entire heater and electrical connections preventing any animal from coming into contact with the heater or electrical wires controlling the heater fan. We take safety seriously and want you to understand we care about the animals you place inside this unit.
  • 1 - Digital Temperature Controller Box - This newly designed digital temperature controller box uses state of the art technology to precisely control the temperature within the incubator. The controller allows precise independent control of both the PTC Heater Fan "Heating" and the Overheat Protection Fan "Cooling" independently. The digital temperature controller box includes instructions and recommended starting temperature settings on the top for quick reference, color-coded connections for heating and cooling allowing simple error-proof connections to the heater fan and the overheat protection fan. The digital temperature controller box includes our new slide-n-lock design which allows for easy removal of the controller box(es) from the incubator. This is perfect as it allows you to use the box to control a heating lamp or pad in a whelping box or similar area when the animals inside transition from the incubator. The slide-n-lock design also allows you to easily remove the box if it were in need of repair drastically reducing shipping costs and transit times that would occur in shipping the entire incubator back for service. A 6 ft power cord is provided with the controller box. The box also includes a 10 amp 250v fuse installed and one additional replacement fuse found in the power connection plate.
  • 1 - Overheat Protection Fan - The overheat protection fan provides the capability to protect the unit from overheating. It also allows independent control over air circulation as the animals placed inside get older. This allows you to increase the number of air exchanges in the unit and provides a variety of uses for the unit. Another interesting feature of the overheat protection fan is you can use it to dehumidify when the animals inside are nearing the end of the incubation period.
  • 2 - Filtered Fan Guards- Dual filtered fan guards filter the outside air and protect the unit from dust and contaminants. There is one filtered fan guard above the PTC heater fan found on the top of the unit and another filtered fan guard is found on the overheat protection fan at the back of the unit.
  • 2 - Built-In Cup Holders - The two cup holders are able to fold down and adjust. This allows you to use a cup(s) of water with a sponge or rag inside or you may also use humidor jars that will evaporate providing manual control of humidity inside the unit. Please note - this method may work for some applications and environments depending upon the individual animals' needs. For most newborn animals such as puppies and kittens, humidity is a critical component in keeping the animal healthy as low humidity levels can lead to dehydration. We recommend purchasing the add-on digital humidity system as it allows precise digital control of the internal humidity level.
  • 1 - Non-Skid Super Deluxe Incubator Vet Bedding - This non-skid super deluxe vet bedding is the perfect pad for newborn puppies, kittens, and other pets. The vet bedding is thick and lush providing a similar feel to fleece or the mother's fur. It holds heat well and draws moisture away from the animals keeping them clean and dry. The non-skid bottom keeps the pad from moving or bunching up. The vet bedding is machine washable and does not harbor bacteria. Do not use fabric softener when washing pad
  • 1 - Analog Hygrometer - The analog hygrometer is generally used for manual humidity control but can also be used a backup and calibration of the digital humidity system (purchased separately). Simply remove the backing from the supplied tape adhesive and place the analog hygrometer over the 'HYG' sticker.
  • 1 - Humidity Connection Port - The humidity connection port is found on the right-hand side closest to the door. It allows you to connect the humidity tubing from the pump included in the digital humidity system (purchased separately). The black plug can easily be removed so you can connect directly to the humidity pump or you can also just remove the black plug for additional air circulation as needed.
  • 1 - Nebulizer Connection Port - The nebulizer connection port is to be used with our Nebulizer Connection Pack and Nebulizer pump (both purchased separately). This connection allows you to connect a nebulizer pump to the machine utilizing it as a nebulizing chamber. Please read the Nebulizer section of the add-on items for more information regarding nebulizers and their use.
  • 1 - Oxygen Connection Port - The oxygen connection port has a unique dual inlet attachment already installed. The unique design allows you to connect an oxygen concentrator (purchased separately) directly to the incubator. The 90-degree connection on the inside allows you to either leave the connection open providing supplemental oxygen to the entire incubator or to connect a short piece of oxygen tubing inside directly to an oxygen cone or similar homemade device. Please read more under "Oxygen Concentrator" in the add-on options section below.
  • 1 - Set of Instructions broken down by component as follows: Incubator instructions - (Provides detailed information regarding how to set up the incubator with links to our Learning Center videos), Digital Temperature Instructions - (Provides precise instructions on using the controller including changing temperature and internal parameters), Digital Humidity Controller & Setup, Instructions for the Digital Humidity System - (Provides precise instructions on using the controller and setting up the digital humidity system, tubing, and attachments purchased separately). *The connections and cords for the incubator, humidity pump, and connections are color-coded and/or marked for ease of use and error-free installation!

Please Note: This incubator is not designed to "cool" it is not an air conditioner. It is designed to heat and mainly used for newborn animals who cannot regulate their own body temperature. The recommended time frame for keeping animals in the incubator is 10-14 days. Animals older than this are putting off their own body temperature which will drastically affect how the unit functions. Placing adult animals inside the unit with the babies is not recommended. The unit is not capable of cooling under the room temperature it is kept in. Animals that are regulating their own body temperature will make the internal temperature rise and will affect the internal temperature the unit can cool down to.

Nebulizer and Oxygen concentrator are additional items available, please call our office for more information.


Exterior Dimensions: 21" L X 18.5" W X 21" H (Included the controller box(es) locked into the plate on the top of the incubator)

Interior Dimensions: Measured At Floor - 18" L X 17" W X 16" H (Vet bedding not included in 16" height measurement - 13" H from the floor to the bottom of the heater guard which is about 5 inches by 5 inches square directly in the center of the incubator top)

Related Products
20% off select DVDs, streaming videos, and online self-study courses through Sunday, February 28, 2021 at 11:59 PM CT