The Full Ventilation Two Door Crate features ventilation on all four sides PLUS two doors. This crate was designed with air movement in mind and this is a great feature for those dogs that must remain in their kennel all day. Having two doors on the crate allows you to position it differently in vehicles or other places for an easier access to get in and out. Compare to the Full Ventilation Crate with only one door.

**These crates are NOT airline approved. They can be made to be airline approved, but only if you specify that you need them airline approved prior to placing your order. Once your order has been processed and your crate has shipped, we cannot make them airline approved. It must be done before the crate has shipped.

It is costly to produce a crate of this style because of the time it takes to weld each and every bar; that is why you don't see many aluminum full ventilation crates on the market.

This full ventilation crate with two doors comes in 3 different sizes. The regular sized crate measures 36 inches long, 24 inches wide and 28 inches tall. The gap between the bars on the crate is 2.5 inches. Most inside wheel-well measurements in trucks, vans, and SUVs are 48" wide. This way you can fit any two of the small crates we offer in your vehicle side-by-side. The large crate measures 42 inches long, 28 inches wide and 32 inches tall. The extra large crate is 48 inches long, 28 inches wide and 32 inches tall. The longest way of 48 inches would fit well between the wheel-wells of most trucks, vans, and SUVs.

This crate is Tig Welded.

Why does Leerburg only sale crates made out of aluminum materials and TIG welded?

Aluminum for dog crates and kennels is the perfect material because it is lightweight, strong, does not rust. Best of all does not absorb the suns heat! All of the crates we offer are aluminum welded by the TIG welding process. TIG welding is a very difficult welding to do and is the welding process that we use because it is the strongest aluminum weld. TIG welding is also known as GTAW (Gas Tungsten Arc Welding). TIG welding is a high quality welding process that is used when a precision welding process is required. To do TIG welding it requires a special TIG welding machine. Many welders can weld steel but aluminum welding takes many years of experience to master. These crates are constructed by a master welder with 28 years experience.

The top and bottom of the crate are polished solid aluminum diamond plate tread brite. The door is made with double layers and it is reinforced. The thickness of the solid aluminum is 1/16." The exterior of the door is also the polished diamond plate tread brite aluminum. This is a very nice looking crate.

There is a one inch lip/edge around the inside of the bottom of the crate, so if your dog gets sick or has an accident while traveling the liquids are contained inside of the crate. This is much easier to clean up than having to clean out the floor of your truck or SUV.

Each side panel of the crate has two recessed handles which are a great feature. When the handles are not in use they fold down to be flush with the side of the kennel. This feature makes carrying the crate safe because you do not have to put your hands in through the bars to move the crate.

There is a welded bar inside the crate side wall to hang a flat sided pail (sold separately). This prevents the dog from tipping over it's water so easily, therefore having a dry kennel to lie in while traveling or at training.

This crate is solid construction with a stainless steel locking door latch. The door can close and latch without being locked but you do have the option of locking the crate if desired.

The crate comes fully assembeled.

To line the floor of the crates here at Leerburg, we use thick rubber mats cut to the size of the crates. They provide a softer surface for the dogs to lay on, and the dogs don't chew on them.

If you are ordering a Rubber Kennel Mat to be placed inside of a crate, please keep in mind that the kennel mat must be cut to the exact specifications of the internal measurement of the crate. For example, a 36x24 Full Ventilation Aluminum crate will use a 34x22 kennel mat due to the inside measurement of the crate.

This is a SPECIAL ORDER ITEM and there are NO RETURNS OR EXCHANGES ALLOWED!

There are currently no reviews for this product.

There are currently no Q&As for this product.

Ask a question about this product.